Curved Doorway Block

With our curved doorway block, you can easily round off your doorway. This gives the room a beautiful, luxurious appearance. These curved blocks seamlessly fit into the current trend of round shapes. Round and organic forms are not only found in interior design but now also in walls, doorways, kitchens, etc.

These curved blocks are made from aerated concrete. This is a building material with many advantages. It is easy to work with, making it not only widely used by professionals but also very suitable for DIY enthusiasts. Aerated concrete does not shrink or expand. These curved doorway blocks are suitable for doorways and wall thicknesses of 115mm. Additionally, these rounded doorway blocks can also be used for a plastered wall of 100mm thickness. Depending on the thickness of the plaster, these 115mm blocks will fit better, and less plaster will be needed to fill the gap.

Order two curved doorway blocks to round off the doorway on both sides.

Create a Rounded Opening

You can easily create a rounded opening yourself with these curved blocks for door and window openings. With these blocks, you can easily round off existing and new openings. This quickly gives the space a luxurious appearance with round and organic shapes.

How to make a doorway round?

The curved, also known as rounded, blocks for the doorway are easy to install. Before you start, it is important to check if the block fits. Sometimes the opening may not be perfectly square, or the block may not fit well for another reason. Once you've done this, apply Stone and Block Adhesive PU to the block. Then, place the block in the desired position and hold it in place. Use temporary support, such as a wooden lath, to keep the block in the correct position. This prevents the block from shifting or coming loose entirely before the adhesive has fully cured. Now it's time to let the adhesive cure, which takes approximately 24 hours. Finally, finish the opening with the desired topcoat. This is often done with plasterwork, followed by a coat of paint.

Requirements:

• Two curved doorway blocks
• Stone and Block Adhesive
• 2 wooden battens

Instructions for making a round door and window opening:

1. Check if the block fits well in the corner, and adjust where necessary. This can be done by sanding the block or the opening with, for example, a sanding board.
2. Apply Stone and Block Adhesive PU and spread it over the block.
3. Place the block in the desired position.
4. Support the block with a wooden lath.
5. Allow the adhesive to fully cure.
6. Trim any excess adhesive and finish the entire opening with, for example, plasterwork.

Dimensions of curved doorway block

Length: 250mm