Aerated concrete block G4/550 600x400x100mm. Aerated concrete 100 mm HplusH

Aerated concrete Blocks with a thickness of 100 mm are very popular and are often used for partitions and partitions. Thanks to the generous dimensions of 60x40x10 cm, you can build a large surface with aerated concrete in a short time. These blocks, also known as Ytong Blocks, are gaining popularity in construction because of their many advantages, allowing interior walls to be constructed easily and quickly. Aerated concrete has several advantages, including its insensitivity to moisture or mold, making it suitable for use in wet areas. This allows you to easily and quickly build a shower wall, shower wall or a (half-height) partition wall in the toilet.

Kimlayer Mortar for Aerated Concrete

Kimlayer mortar is used to quickly and easily lay the first aerated concrete block on the floor straight and level. The Kim mortar is ready-made; all you have to do is add water. This mortar can be used not only for aerated concrete, but also for, for example, sand-lime brick.

Consumption of base layer mortar per m1

Consumption of aerated concrete adhesive per m2

Finish aerated concrete wall with paint

Aerated concrete blocks, also called Ytong Blocks, with dimensions of 600x400x100 mm are ideal for building partition walls, for example in bedrooms. We recommend using the appropriate aerated concrete glue for gluing the aerated concrete blocks. The blocks of this size have a smooth structure, making them immediately ready for the finishing layer. Many people choose to apply wall paint to the wall and use Texing. Before you can apply the wall paint, it is wise to prepare the aerated concrete wall for it. This can be done with Fix and Finish from Knauf, a thin plaster. This allows any imperfections such as seams and holes to be removed easily and quickly. Before you start painting the wall, it is important to treat it with primer for good adhesion of the wall paint.

Wallpapering an aerated concrete wall

The blocks of 10 cm thickness are often used for interior walls, for example in the living room. A popular finishing material is wallpaper, such as non-woven wallpaper, vinyl wallpaper, renovlies, photo wallpaper or paper wallpaper. If you want to wallpaper an aerated concrete wall, you must first prepare your wall. Because the aerated concrete blocks in this size do not have a coarse structure, your wall is ready for wallpaper almost immediately. Before you start, you can fill any seams or holes with a thin plaster from Knauf, for example. To prevent an unnecessary amount of wallpaper glue from being absorbed by the wall, you can treat the aerated concrete wall with Primer. After this, your aerated concrete wall is ready for the wallpaper layer.

Sustainable and Environmentally Friendly

Aerated concrete, also known as aerated concrete, owes its name to the air bubbles that arise during the production process. This allows insulation with stagnant air, resulting in an ideal microclimate in every room. Building with aerated concrete is a sustainable and environmentally friendly way of building. The building material is made of natural materials, namely sand, lime and cement. Aerated concrete is 100% recyclable; the waste that remains can re-enter the production process.

Specifications

• Manufacturer: H+H
• Quality: G4/550 - PP4-0.55 - C4/550
• Compressive strength: 5.16 N/mm
• Weight class: 525 kg/m3 (±25 kg)
• Thermal conductivity: 0.131 λ(W/mk)
• Number of pieces per pallet: 60 pieces
• Number of m2 per pallet: 14.40 m2
• Number of m3 per pallet: 1,440 m3
• Number of blocks per m2: 4.16 pieces
• Glue consumption per m2: 1.60 kg
• Execution: Smooth
• Certificate: KOMO
• EAN Number: 4015830016356